{"id":3325,"date":"2021-06-03T12:12:02","date_gmt":"2021-06-03T12:12:02","guid":{"rendered":"https:\/\/www.tpservers.net\/prismsurface\/?p=3325"},"modified":"2021-06-03T12:13:06","modified_gmt":"2021-06-03T12:13:06","slug":"the-gun-which-saves-50-paint-for-aircraft-finishing-and-mro","status":"publish","type":"post","link":"https:\/\/www.tpservers.net\/prismsurface\/2021\/06\/03\/the-gun-which-saves-50-paint-for-aircraft-finishing-and-mro\/","title":{"rendered":"The Gun which saves 50% Paint for Aircraft Finishing and MRO"},"content":{"rendered":"

Yes you heard it. The magic painter gun can save you around 50% paint while painting aircraft. We all know that painting aircraft,helicopters and military aircraft is expensive. The finish required must be exceptional quality. Too much of paint or too little paint can have an impact of the performance of the aircraft. Hence the quality of refinishing is very important. Different aircraft require different amounts\u00a0 of paint. The majority of aircraft are painted with a high HVLP system or a electrostatic gun system which is able to add a very thin, even layer of paint. Paint is generally applied in three layers: primer, base coast, top coat. It is the top coat that gives a plane its shiny appearance.<\/p>\n

Prism has introduced a revolutionary painting gun known as the MAGIC PAINTER GUN SYSTEM for aircraft painting and MRO painting where the system does not use compressed air and the gun can sav you upto 50% paint. When compressed air is not used the issues associated with compressed air such as oil,moisture, humidity and high compressor maintenance required is eliminated. The finish achieved also is more superior in quality. Magic painter gun also uses warm dry air for painting which is ideal for the finest level of paint atomisation and elimination of moisture. Due to the warm dry air used, your paint drying is also accelerated to some extent. finish\u00a0 achieved is very superior.<\/p>\n

Highlights of the system include:<\/strong><\/p>\n

    \n
  • Paint savings upto 50%<\/li>\n
  • Energy savings as it does not use compressed air<\/li>\n
  • Transfer efficiency between 85-90%<\/li>\n
  • Sprays paint at 4-7 PSI and 0.7 Bar<\/li>\n
  • Temperature in air supplied by the gun is 45-60 degrees Celsius<\/li>\n
  • Able to penetrate into grooves and crevices of the AIRCRAFT<\/li>\n
  • Supplies warm dry air without any moisture and system does not use compressed air. Can be connected to your existing paint supply system. Better paint finish quality<\/li>\n
  • No complex expensive electrostatic procedures and maintenance such as grounding or earthing<\/li>\n
  • More paint savings leads to reduced VOCS<\/li>\n
  • Warm dry air quickens drying time<\/li>\n
  • Operator health safety is increased as there is no over spray<\/li>\n
  • Cleaner greener environment<\/li>\n<\/ul>\n

    Magic painter system can be used on aircraft\u2019s of any size, helicopters, military equipment aircraft\u2019s, MRO painting hangars for refinishing etc.<\/p>\n<\/div><\/div>